PRIMRE/Databases/Projects Database/Projects/Sanda Sound
< PRIMRE | Databases | Projects Database | Projects
Sanda Sound
Oceanflow's E35 device was installed on its pre-laid moorings at Sanda Sound on the 7th August 2014. The Sanda Sound test site was chosen for its combination of strong tidal flow and harsh wave climate in order to fully validate the operability and survivability of the Evopod™ low motion hull form. The unit was monitored from Oceanflow's shore station near Southend, South Kintyre.
The project was completed in 2015, but was not decommissioned until September, 2017.
- Planned: Project has identified a deployment location and is preparing for deployment
- Operational: Project is deployed in the water and is active
- Completed: Project was previously deployed in the water
- Decommissioned: Installation has been fully removed in accordance with regulations
- Canceled: Project was canceled before being deployed in the water
- Tidal
- Open Ocean: Main body of ocean, not enclosed or partially enclosed by land
- Coastal: Open water near the coast, spanning between land and shelf boundary
- Enclosed Bay: water that is partially surrounded by land, with a mouth open to larger water
- Constricted Channel: A channel where water flows quickly due to narrowing by the land
- River: Water flowing from land towards a larger body of water
This Project has the following MRE Devices
Filters:
Citation Formats
“Sanda Sound.” Marine Energy Projects Database: Projects, PRIMRE, United States Department of Energy, https://openei.org/wiki/PRIMRE/Databases/Projects_Database/Projects/Sanda_Sound. Accessed <day> <monthRoman> <year>.
Marine Energy Projects Database: Projects. <year>. "Sanda Sound." Accessed <monthRoman> <day>, <year>. https://openei.org/wiki/PRIMRE/Databases/Projects_Database/Projects/Sanda_Sound.