Net Metering (Oregon)

From Open Energy Information

Last modified on February 12, 2015.

Rules Regulations Policies Program

Place Oregon
Name Net Metering
Incentive Type Net Metering
Applicable Sector Agricultural, Commercial, Fed. Government, Industrial, Institutional, Local Government, Nonprofit, Residential, Schools, State Government
Eligible Technologies Anaerobic Digestion, Biomass, Fuel Cells, Hydroelectric, Landfill Gas, Photovoltaics, Small Hydroelectric, Solar Thermal Electric, Wind
Active Incentive Yes
Implementing Sector State/Territory
Energy Category Renewable Energy Incentive Programs
Aggregate Capacity Limit No limit specified for PGE and PacifiCorp; 0.5% of utility's historic single-hour peak load for munis, co-ops, PUDs
Applicable Utilities All utilities (except Idaho Power)

Meter Aggregation Allowed
Net Excess Generation Credited to customer's next bill at retail rate for IOU customers; varies for muni, co-op and PUD customers

REC Ownership Customer owns RECs (unless Energy Trust subsidizes system)

System Capacity Limit 2 MW for non-residential and 25 kW for residential PGE and PacifiCorp customers; 25 kW for muni, co-op and PUD customers

Date added to DSIRE 2000-01-01
Last DSIRE Review 2013-05-14
Last Substantive Modification
to Summary by DSIRE

References DSIRE[1]


Oregon has established separate net-metering programs for the state's primary investor-owned utilities (PGE and PacifiCorp), and for its municipal utilities and electric cooperatives.

PGE and PacifiCorp Customers

The Oregon Public Utilities Commission (PUC) adopted new rules for net metering for PGE and PacifiCorp customers in July 2007, raising the individual system limit from 25 kilowatts (kW) to two megawatts (MW) for non-residential applications. (The rules do not apply to customers of Idaho Power, which provides net metering to Oregon customers pursuant to rules adopted by the Idaho Public Utilities Commission.) The limit on individual residential systems is 25 kW. Systems that generate electricity using solar power, wind power, hydropower, fuel cells or biomass resources are eligible. Net-metered systems must be intended primarily to offset part or all of a customer’s electricity requirements. Utilities may not limit the aggregate capacity of net-metered systems.

Net excess generation (NEG) is carried over to the customer's next bill as a kilowatt-hour credit for a 12-month period. Unless a utility and a customer otherwise agree, the annual billing cycle will conclude at the end of the March billing cycle of each year. Any NEG remaining at the end of a 12-month period will be credited at the utility's avoided-cost rate to customers enrolled in Oregon's low-income assistance programs. Customers retain ownership of all renewable-energy credits (RECs) associated with the generation of electricity.

The aggregation of meters for net metering is allowed. There is no limit on the number of net-metering facilities per customer, as long as the capacity of all net-metering facilities on a customer's contiguous property does not exceed the applicable capacity limit. Meters that are on different rate schedules are able to be aggregated.

Customers of Municipal Utilities, Cooperatives and People's Utility Districts

Oregon's municipal utilities, electric cooperatives and people's utility districts must offer customers net metering pursuant to OR Revised Statutes 757.300. Systems that generate electricity using solar power, wind power, hydropower, fuel cells or biomass resources are eligible. Net-metered systems must be intended primarily to offset part or all of a customer’s requirements for electricity. The aggregate capacity of all net-metered systems is limited to 0.5% of a utility's historic single-hour peak load.

Net excess generation (NEG) is either purchased at the utility's avoided-cost rate or credited to the customer's next monthly bill as a kilowatt-hour credit. At the end of an annual period, any unused NEG credit is granted to the electric utility. This credit, in turn, is then either granted to customers enrolled in the utility's low-income assistance programs, credited to the generating customer, or dedicated to an "other use."

Net metering is achieved using a standard bi-directional meter. Utilities may not place any additional standards or requirements on customers beyond those requirements established by the National Electric Code (NEC), National Electrical Safety Code (NESC), Institute of Electrical and Electronic Engineers (IEEE), and Underwriters Laboratories (UL). However, utilities may be authorized to assess a fee or charge if the utility's direct costs of interconnection and administration of net metering outweigh the distribution system, environmental and public-policy benefits of allocating costs among its customers.

In July of 2008, the PUC issued a ruling to clarify that third-party investors may participate in net metering, and that a third-party investor’s sale of electricity to a utility customer does not subject the investor to regulation by the commission.

Contact Name Maury Galbraith
Department Oregon Public Utility Commission
Address PO Box 2148
Place Salem, Oregon
Zip/Postal Code 97308-2148
Phone (503) 378-8718
Fax (503) 373-7752

Authorities (Please contact the if there are any file problems.)

Authority 1: OR Revised Statutes 757.300
Date Enacted 9/1/1999; amended, 6/7/2005

Authority 2: Or. Admin. R. 860-039
Date Effective 2007-07-24
Date Enacted 2007-07-24

Authority 3: Or. Admin. R. 860-022-0075
Date Effective 2005-11-30

  • Incentive and policy data are reviewed and approved by the N.C. Solar Center's DSIRE project staff.[1]


  1. 1.0 1.1  "Database of State Incentives for Renewables and Efficiency (DSIRE)"