U
1001

Property:Incentive/InstallReqs

From Open Energy Information

Property Name Incentive/InstallReqs
Property Type Text
Description Installation Requirements.

Pages using the property "Incentive/InstallReqs"

Showing 250 pages using this property.

View (previous 250 | next 250) (20 | 50 | 100 | 250 | 500)

A
AEP Ohio - Commercial New Construction Energy Efficiency Rebate Program (Ohio) +Equipment must be new<br /> Eligible lamps and ballasts are listed on the Consortium for Energy Efficiency (CEE) website  +
AEP Ohio - Commercial Self Direct Rebate Program (Ohio) +To be eligible, participants must use more than 700,000 kWh or have a national/regional account with multiple facilities in one or more states.  +
AEP Ohio - Renewable Energy Credit (REC) Purchase Program (Ohio) +Customer must have an interconnection agreement with AEP Ohio  +
AEP Ohio - Renewable Energy Technology Program (Ohio) +All necessary permits and inspections must be obtained.<br /> All customers must take service under the Company's Schedule Net Energy Metering Service, and all equipment must comply with AEP Ohio's Interconnection Requirements. Additional requirements apply.  +
AEP SWEPCO - SCORE Program (Texas) +Cash Incentive: New Construction and Renovations only  +
AEP SWEPCO - SMART Source Solar PV Program (Texas) +Systems must be grid-connected and installed on the customer's side of the meter; estimated system performance must be at least 80% of optimal, unshaded output as measured by PVWatts; Must use Service Provider from the registered Service Provider list (specific eligibility requirements)  +
AEP Texas Central Company - SCORE Program (Texas) +Cash Incentive: New Construction and Renovations only  +
AEP Texas Central Company - SMART Source Solar PV Rebate Program (Texas) +Systems must be grid-connected and installed on the customer's side of the meter; estimated system performance must be at least 80% of optimal, unshaded output as measured by PVWatts; Must use Service Provider from the registered Service Provider list (specific eligibility requirements)  +
AEP Texas North Company - SCORE Program (Texas) +Cash Incentive: New Construction and Renovations only  +
AEP Texas North Company - SMART Source Solar PV Rebate Program (Texas) +Systems must be grid-connected and installed on the customer's side of the meter; estimated system performance must be at least 80% of optimal, unshaded output as measured by PVWatts; Must use Service Provider from the registered Service Provider list (specific eligibility requirements)  +
APS - Renewable Energy Incentive Program (Arizona) +PV systems must be installed by a licensed contractor holding one or more of the following certifications with the Arizona Registrar of Contractors: C-11, K-11, L-11. <br /> SWH systems must be installed by a licensed contractor holding one or more of the following certifications with the Arizona Registrar of Contractors, C-37, C-37R, K-77, K-78, L-77, L-78.  +
APS - Residential Energy Efficient Rebate Program (Arizona) +For the APS AC Rebate, units must be installed by an APS qualified contractor.<br /> For the Duct Test and Repair Rebate, tests and repairs must be done by a Building Performance Institute (BPI) Certified Contractor.  +
Agricultural Energy Efficiency Program (New York) +Improvements in farm residences are not eligible for incentives  +
Agricultural Lighting and Equipment Rebate Program (Vermont) +Must be installed in agricultural operations; rebate reservation is required and pre-approval is required for projects with rebate payments greater than $5000.  +
Agricultural Pumping Efficiency Program (California) +The project must be completed within 20 months of an acceptable pump efficiency test, performed before the retrofit project.  +
Alabama - Residential Energy-Efficient Appliance Rebate Program (Alabama) +Appliance must be purchased on or after the program's start date  +
AlabamaWISE Home Energy Program (Alabama) +Auditors must be BPI-certified and approved by Nexus Energy Center. Installers must be approved and agree to quality assurance by Nexus Energy Center.  +
Alameda Municipal Power - Solar Photovoltaics Rebate Program (California) +Must be grid-connected and installed by appropriately licensed contractor  +
Alaska - Residential Energy-Efficient Appliance Rebate Program (Alaska) +Appliance must be purchased on or after the program's start date  +
Alexandria Light and Power - Residential Energy Efficiency Rebate Program (Minnesota) +Energy Star Appliances must be installed within Alexandria Light and Power's service territory<br /> A copy of the original dated sales receipt must be included with application<br /> Equipment must be installed by December 31 of current program year<br />  +
Alliant Energy (Wisconsin Power & Light) - Renewable Incentives Grant Program (Wisconsin) +Systems must meet all Focus on Energy installation requirements and all WPL Customer-owned generation requirements  +
Alliant Energy Interstate Power and Light (Electric) - Business Energy Efficiency Rebate Programs (Iowa) +Alliant Energy must supply primary energy.  +
Alliant Energy Interstate Power and Light (Electric) - Business Energy Efficiency Rebate Programs (Minnesota) +Alliant Energy must supply primary energy.  +
Alliant Energy Interstate Power and Light (Electric) - Residential Energy Efficiency Rebate Program (Minnesota) +See program web site  +
Alliant Energy Interstate Power and Light (Gas) - Business Energy Efficiency Rebate Programs (Minnesota) +Alliant Energy must supply primary energy.  +
Alliant Energy Interstate Power and Light (Gas) - Residential Energy Efficiency Program +Alliant Energy must supply primary heating energy. Home must be built before January 1, 2001. Renters need owner’s prior approval (Alliant Energy can contact owner). A Home Energy Audit must be completed before new insulation is installed.  +
Alliant Energy Interstate Power and Light - Business and Farm Renewable Energy Rebates (Iowa) +The system must offset on-site electric usage  +
Alpena Power Company (Efficiency United) - Commercial and Industrial Rebate Program (Michigan) +Occupancy Sensors: Socket based sensors do not qualify<br /> Custom: Once project is approved, customers has 120 days to complete project and submit application<br />  +
Alpena Power Company (Efficiency United) - Energy Efficiency Assistance Program (Michigan) +Approved weatherization agencies and subcontractors will perform installations  +
Alpena Power Company (Efficiency United) - Residential Energy Efficiency Rebate Program (Michigan) +Central AC Unit/ECM Blower: installed by licensed contractor<br />Central AC Unit/ECM Blower: installed by licensed contractor<br />  +
Alternative Energy Production Tax Credit (Corporate) (Pennsylvania) +All projects are subject to audit and on-site inspection to verify reported information  +
Alternative Power & Energy Grant Program (Indiana) +Project construction cannot begin until after award notification.  +
Ameren Illinois (Electric) - Commercial Kitchen and Grocery Incentives Program (Illinois) +All projects over 10,000 must receive pre-approval from Ameren<br />All projects over 10,000 must receive pre-approval from Ameren<br />  +
Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives (Illinois) +All projects over $10,000 must receive pre-approval from Ameren<br /> Retro-Commissioning (compressed air): minimum of 100 hp (total), at least two compressors, and has been at least two years since the last major upgrade/tune-up<br /> Retro-Commissioning (health care facility): facility must be 100,000 sq. ft. or larger<br /> Leak Survey and Repair projects do not require pre- approval<br /> Retro-Commissioning projects must receive pre-approval from ActOnEnergy. Payback period for implementation incentives must be between 1 and 7 years.See individual project guides for program requirements.  +
Ameren Illinois (Electric) - Multi-Family Properties Energy Efficiency Rebate Program (Illinois) +Electrical contractor must be a Program Ally  +
Ameren Illinois (Electric) - Residential Energy Efficiency Rebates (Illinois) +HVAC: must be installed by Ameren approved-list of HVAC contractors.  +
Ameren Illinois (Gas) - Business Efficiency Incentives (Illinois) +All projects over $10,000 must receive pre-approval from Ameren Illinois <br /> Retro-Commissioning (Healthcare facility) must be 100,000 sq. ft. or larger  +
Ameren Illinois (Gas) - Residential Energy Efficiency Rebates (Illinois) +Equipment: must be installed by Ameren approved-list of contractors.  +
Ameren Illinois - Lighting Rebates for Businesses (Illinois) +All projects with incentive requests greater than $10,000 require pre-approval from ActOnEnergy<br />  +
Ameren Illinois Utilities - Small Business Energy Efficiency Incentive Program (Illinois) +Programmable Thermostat: Facility must have less than 400 kW demand<br />Programmable Thermostat: Facility must have less than 400 kW demand<br />  +
Ameren Missouri - MultiFamily Income Qualified Program (Missouri) +Building Program Partners are eligible if they are owners and managers of HUD-financed and USDA-financed multifamily buildings with three dwelling units or more and some reserved for income-qualified residents.<br /> Participants must apply to improve common areas of the building.  +
Ameren Missouri - Photovoltaic Rebate Program (Missouri) +System must be grid tied, net metered, and permanently installed on the customer's property  +
Anaheim Public Utilities - Green Building Rebate Program (California) +Contact APU to set up the initial consultation.  +
Anaheim Public Utilities - Greener Cleaners Energy Efficiency Incentive Program (California) +Qualifying businesses must select, purchase, and install new equipment within 90 days.  +
Anaheim Public Utilities - PV Buydown Program (California) +The installer must be a properly licensed California contractor with an active General Contractor A or B, C-10 or C-46 license  +
Anoka Municipal Utility - Residential Energy Efficiency Rebate Program (Minnesota) +To apply for an appliance rebate customers must fill out an AMU rebate form and attach a copy of a dated sales receipt. Rebate forms must be submitted within 6 months of the purchase date.  +
Arkansas - Residential Energy-Efficient Appliance Rebate Program (Arkansas) +Appliance must be purchased on or after the program's start date  +
Ashland Electric Utility - Residential Energy Efficiency Rebate Programs (Oregon) +Window Replacements and Insulation: requires energy audit performed by the City before installation<br /> Heat Pump: must be installed and commissioned by a heating contractor on the City's approved list  +
Assisted Home Performance Grants (New York) +Measures must be installed by BPI certified contractor  +
Atmos Energy (Gas) - Residential Efficiency Program (Iowa) +Installed equipment must be new and Energy Star qualified; a separate form should be filled out for each technology.  +
Atmos Energy (Gas) - Residential Efficiency Program (Missouri) +Installed equipment must be new and Energy Star qualified; a separate form should be filled out for each technology.  +
Atmos Energy - Natural Gas and Weatherization Efficiency Program (Kentucky) +Installed equipment must be new and Energy Star qualified; a separate form should be filled out for each technology.  +
Austin Energy - Energy Miser Vending Products Program (Texas) +Must remain installed on a refrigerated non-perishable soft drink machine, reach-in cooler, or non-refrigerated snack machine in a facility served by Austin Energy for a period of 5 years.  +
Austin Energy - Multi-Family Energy Efficiency Rebate Program (Texas) +All work shall be performed in accordance with all applicable manufacturer's instructions and recommendations. Additionally, all applicable requirements of the City of Austin building code, mechanical code, electrical code, plumbing code, energy code and all federal and local laws and regulations for capturing, reclaiming and disposal of ozone depleting compounds must be met. The building's in-house maintenance staff or a contractor may perform most work. Air conditioning work must be performed by a person holding a valid Texas Air Conditioning and Refrigeration Contractors' License or by the licensed contractor's designee.  +
Austin Energy - Residential Energy Efficiency Rebate Program (Texas) +Work must be performed by a participating contractor  +
Austin Energy - Residential Solar PV Rebate Program (Texas) +Must be grid-connected. Must use a solar installer from the Austin Energy Registered Installer List. Solar installers must have at least one employee certified by the North American Board of Certified Energy Practitioners (NABCEP). Homes must meet pre-determined energy efficiency requirements in order to qualify for a rebate.  +
Austin Energy - Solar Water Heating Rebate (Texas) +Must be installed by a licensed contractor; <br /> Equipment must meet all applicable Austin city codes and adhere to the city building permit process  +
Austin Energy - Value of Solar Residential Rate (Texas) +System must be interconnected with Austin Energy electric distribution system  +
Austin Utilities - Solar Rebate Program (Minnesota) +Systems must be installed by a licensed, qualified professional<br /> An energy audit must be conducted prior to installation  +
Avista Utilities (Electric) - Commercial Energy Efficiency Incentives Program (Idaho) +PC Power Management Software: Must achieve minimum average savings of 120 annual kWh per controlled PC<br />  +
Avista Utilities (Electric) - Commercial Energy Efficiency Incentives Program (Washington) +PC Power Management Software: Must achieve minimum average savings of 120 annual kWh per controlled PC<br />  +
Avista Utilities (Electric) - Commercial Food Equipment Rebates (Washington) +Tank Dishwashers: Primary water heat source must be electric  +
Avista Utilities (Electric) - Commercial Lighting Energy Efficiency Program (Idaho) +Incentives are for Avista customers of rate schedules 11 or above.  +
Avista Utilities (Electric) - Commercial Lighting Energy Efficiency Program (Washington) +Incentives are for Avista customers of rate schedules 11 or above.  +
Avista Utilities (Electric) - Residential Energy Efficiency Rebate Programs (Idaho) +Insulation: New insulation that increases the R-Value by R10 or greater<br /> Air Source Heat Pump: 8.5 HSPF, 14 SEER (single family homes); 7.7 HSPF, 13 SEER (manufactured homes)<br /> Other equipment: Must meet the efficiency requirements on the program web site.  +
Avista Utilities (Electric) - Residential Energy Efficiency Rebate Programs (Washington) +Replacement of Electric Straight Resistance (electric forced air furnace or electric baseboard heat) as Primary Heat: Can be replaced with an electric heat pump or an efficient gas central heating system.  +
Avista Utilities (Gas) - Prescriptive Commercial Incentive Program (Oregon) +Furnaces 135 mmbtu or less: kitchen equipment and site specific sizes vary.  +
Avista Utilities - Commercial Energy Efficiency Incentives Program (Idaho) +PC Power Management Software: Must achieve minimum average savings of 120 annual kWh per controlled PC<br /> Electric to Natural Gas Water Heater Conversion: Water heaters must be 80 gallons or smaller with an Efficiency Factor greater than .60 AFUE or 90% in a building less than 4000 sq. ft.<br /> Demand Controlled Ventilation System: Must be an existing building keeping temperatures between 65º and 75º F during operating hours.  +
Avista Utilities - LEED (NC or EB) Certification Energy Efficiency Rebate Program (Idaho) +Applicants must register their project with the U.S. Green Building Council (USGBC).  +
Avista Utilities - LEED (NC or EB) Certification Incentive Program (Washington) +Register project with the U.S. Green Building Council (USGBC)  +
Avista Utilities - Site-Specific Energy Efficiency Incentives (Washington) +To be eligible for incentives, you need to contact Avista in the early stages of project development. Incentives will not be paid on projects that are already under construction or that are being developed without Avista's involvement.  +
Azusa Light & Water - Solar Partnership Program (California) +Installer must be a properly licensed California contractor with an active A, B, C-10 or C-46 license  +
B
Baltimore Gas & Electric Company (Electric) - Commercial Energy Efficiency Program (Maryland) +Facility owner must commit to funding up to $15,000 to match BGE financial incentives.  +
Bandera Electric Cooperative - Residential Heat Pump Rebate Program (Texas) +Must be installed by certified heating, ventilation, and A/C contractor. Heats Pumps must be installed in existing homes.  +
Bangor Hydro Electric Company - Residential and Small Commercial Heat Pump Program (Maine) +Contractor must be a registered installer<br /> Commercial customers must have billing demand of less than 25 kW<br /> The home or business where the heat pump will be installed is owner-occupied  +
Banning Electric Department - Solar Support Program (California) +Must be grid-connected, net metered, and installed by either the system owner or a California contractor with an A, C-10 or C-46 license.  +
Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program (Wisconsin) +Central Air rebates require participation in the Load Management Program  +
Be SMART Home Efficiency Rebate Program (Maryland) +Home energy audit required prior to participation; audit and installation must be performed by a program-approved contractor  +
Beaches Energy Services - Residential Energy Efficiency Rebate Program (Florida) +Heat Pumps: must be installed by an authorized State of Florida Certified Heating, Air Conditioning, Refrigeration and Ventilation (HARV) or mechanical contractor<br />Heat Pumps: must be installed by an authorized State of Florida Certified Heating, Air Conditioning, Refrigeration and Ventilation (HARV) or mechanical contractor<br />  +
Beaches Energy Services - Solar Water Heating Rebate Program (Florida) +Newly constructed homes are not eligible for rebate<br /> Systems must be installed by a licensed Florida contractor according to manufacturer specifications<br /> System must be at least 80% shade free<br /> Systems must be installed prior to the issuance of a rebate  +
Berkeley Electric Cooperative - Energy Efficiency Rebate Program (South Carolina) +Co-op will install load management switch on water heater  +
Berkshire Gas - Residential Energy Efficiency Rebate Program (Massachusetts) +Incentives will be paid directly to installation contractor  +
Biogas and Biomass to Energy Grant Program (Illinois) +Requires a state licensed installer with appropriate insurance coverage  +
Black Hills Energy (Gas) - Commercial Energy Efficiency Program (Colorado) +Insulation, Infiltration Control, Pool/Spa Covers: require a commercial energy evaluation recommendation to be eligible for payout.  +
Black Hills Energy (Gas) - Commercial Energy Efficiency Rebate Programs (Iowa) +Rebates over $10,000 must be pre-approved.<br /> Certain measures require a commercial energy evaluation recommendation to be eligible for payout.  +
Black Hills Energy - Solar Power Program (Colorado) +PV installations are subject to on-site supervision by a NABCEP certified professional to maintain a 3:1 ratio for the installation crew (one certified installer for every three solar installers)  +
Blue Ridge EMC - Residential Solar Water Heating Rebate Program (North Carolina) +Systems must be installed by an [http://www.blueridgeemc.com/greensmart/SWH_Authorized_Dealers_090109.asp authorized installer]  +
Blue Ridge Mountain Electric Membership Corporation - Water Heater Rebate Program (Georgia) +Heat pump installed by a member of Quality Contractor List.  +
Broward County - Energy Sense Appliance Rebate Program (Florida) +Must be current eligible Energy Star appliance  +
Bryan Texas Utilities - Commercial Energy Efficiency Program (Texas) +All installations must be recommended by a BTU energy service advisor.  +
Bryan Texas Utilities - Solar Hot Water Rebate Program (Texas) +Must be installed by a licensed contractor; Equipment must meet all applicable city codes and adhere to the city building permit process  +
Bryan Texas Utilities - Solar PV Rebate Program (Texas) +Must be installed by a BTU certified installer, who must be NABCEP certified within 2 years of registering with BTU; Licensed electrical contractors must obtain all applicable permits and perform all electrical interconnections; Shading no more than 20% annually; azimuth and tilt must be within acceptable limits  +
Butler Rural Electric Cooperative - Residential Rebate Program (Ohio) +Members must use an HVAC dealer from the Cooperative's participating dealers  +
C
CCEF - Affordable Housing Initiative Solar PV Rebate Program (Connecticut) +Installation must comply with all federal, state, and local codes; Must be grid-connected and installed by a pre-approved contractor; Installation must be in service territory of United Illuminating Company or Connecticut Light and Power  +
CEC - New Solar Homes Partnership (California) +Systems must be installed by appropriately licensed California solar contractors<br /> Self-installs are also acceptable<br /> Although not required, installation contractors are encouraged to become certified by the North American Board of Certified Energy Practitioners (NABCEP).<br /> Although not required, installation contractors are encouraged to become certified by the North American Board of Certified Energy Practitioners (NABCEP).<br />  +
CEFIA - Residential Solar PV Rebate Program (Connecticut) +Starting March 1, 2010: applicants must participate in CEEF's Home Energy Solutions (HES) program <br /> Installation must comply with all federal, state, and local codes;<br /> Must be grid-connected and installed by a pre-approved contractor;<br /> Installation must be in service territory of United Illuminating Company or Connecticut Light and Power  +
CL&P - Residential Heating and Cooling Rebates (Connecticut) +Varies  +
CPS Energy (Electric) - Residential Energy Efficiency Rebate Program (Texas) +Only measures installed by a CPS Energy registered contractor are eligible for rebates<br />  +
CPS Energy - Solar Hot Water Rebate Program (Texas) +System must meet all applicable codes and be installed by a CPS Energy registered installer (minimum qualifications apply);<br /> System must be designed for frost protection and scale elimination or remediation  +
CPS Energy - Solar PV Rebate Program (Texas) +Systems must be grid connected and installed by a CPS Energy registered installer (must have NABCEP certification within 2 years); Systems should be South oriented with at least 260 square feet of unobstructed space.  +
California - Energy Efficient Appliance Rebate Program (California) +Equipment must be replacing older, less efficient equipment. The appliance that is being replaced must be recycled, and the program participant must provide evidence that the old appliance was recycled.  +
California Solar Initiative - Low-Income Solar Water Heating Rebate Program (California) +Systems must be installed by an appropriately licensed contractor  +
California Solar Initiative - Multi-Family Affordable Solar Housing (MASH) Program (California) +Must have a current A, B, C-10 or C-46 license.  +
California Solar Initiative - PV Incentives (California) +Systems must be installed by appropriately licensed California solar contractors or self-installed by the system owner.<br /> Installer certification by NABCEP is encouraged.  +
California Solar Initiative - Pilot Solar Water Heating Program (California) +Can be a retrofit project or new construction<br /> Installation contractors must have an active A, B, C-4, C-36 or C-46 license. Self-installers are not required to be licensed, but must attend a one-day training workshop.<br /> Contractors are encouraged to become NABCEP-certified.  +
California Solar Initiative - Single-Family Affordable Solar Housing (SASH) Program (California) +Systems must be installed by appropriately licensed California solar contractors who have been accepted by the SASH program manager as a SASH program partner installer or self-installed by the system owner. A significant portion of the PV system will be installed directly by GRID Alternatives.  +
California Solar Initiative - Solar Thermal Program (California) +Systems must be installed by an appropriately licensed contractor who is listed as being eligible to participate in the program.<br /> Self-installations are permitted if the building owner attends a designated CSI-Thermal Program training workshop.  +
Cape Light Compact - Commercial, Industrial and Municipal Buildings Energy Efficiency Rebate Program (Massachusetts) +Retrofit Program (Small Business): Less than or equal to 300 kW demand<br /> Retrofit Program (Large Business): Greater than 300 kW demand<br /> New Construction: Pre-approval is required for incentive or rebate totals greater than $5,000  +
Cape Light Compact - Residential Energy Efficiency Rebate Program (Massachusetts) +Central AC/Heat Pump: must be installed by pre-approved contractor. <br /> Solar Water Heater: must replace electric hot water heater. System must be installed by qualified SEBANE or NESEA installer.<br /> Certain incentives are offered only in conjunction with an audit  +
Cascade Natural Gas - Commercial Efficiency Rebate Program (Washington) +Incentives are only valid if the new equipment provides a significant efficiency increase over existing equipment.  +
Cascade Natural Gas - Conservation Incentives for Existing Homes (Washington) +High Efficiency Natural Gas Hearth: AFUE 80% minimum<br /> High Efficiency Natural Gas Furnace: AFUE 90% minimum<br /> Conventional Natural Gas Water Heater: .64 EF minimum<br /> Condensing Tankless Water Heater: .91 EF minimum<br /> High Efficiency Combination Radiant Heat/Water Heat System: AFUE 90% minimum<br /> Ceiling or Attic Insulation: Equal to or greater than R-38; prior condition must not exceed R-18<br /> Wall Insulation: Equal to or greater than R-11; prior to condition must not exceed R-4<br /> Floor Insulation: Equal to or greater than R-30 or to fill cavity; prior condition must not exceed R-11<br />Ducts must be sealed to PTCS standards  +
CenterPoint Energy - Commercial and Industrial Energy Efficiency Programs (Texas) +Retro-Commissioning: Existing facilities should generally be at least 400,000 sq. ft. of air-conditioned space, with higher than average energy consumption.  +
CenterPoint Energy - SCORE and CitySmart Program (Texas) +Projects must reduce peak kW demand.  +
Central Electric Cooperative - Non-Residential Lighting Rebate (Oregon) +If customers call the number below, a trained lighting energy analyst will contact them to look at the system. The energy analyst will instruct customers on how to work through the program and receive rebates.  +
Central Electric Cooperative - Residential Energy Efficiency Rebate Programs (Oregon) +Weatherization program is for members with site-built electrically heated homes constructed before 1992<br /> Equipment must be installed within CEC's service territory. Some of the rebates require that a home energy analysis be completed before work begins. Customers should check with the utility for confirmation.  +
Central Electric Cooperative - Residential Energy Efficiency Rebate Programs (Oregon) Utility Rebate Program +Weatherization program is for members with site-built electrically heated homes constructed before 1992.  +
Central Electric Cooperative - Solar Rebates (Oregon) +Customers must have an approved net metering agreement with CEC<br /> System must be installed by a CEC-approved installer  +
Central Florida Gas - Residential Water Heater Retention Program (Florida) +Must be installed by an Energy Plus Partner  +
Central Florida Gas - Space Conditioning for Commercial Applications (Florida) +Must be installed by an Energy Plus Partner  +
Central Florida Gas - Space Conditioning for Residential Applications (Florida) +Must be installed by an Energy Plus Partner  +
Central Georgia EMC - Photovoltaic Rebate Program (Georgia) +Must be installed by a licensed contractor; must be installed in accordance with all applicable building and national electric codes  +
Central Georgia EMC - Residential Energy Efficiency Rebate Program (Georgia) +Varies by technology  +
Central Lincoln People's Utility District - Renewable Energy Incentive Program (Oregon) +PV and Solar Water Heating: Installations must be completed and certified by a state of Oregon Tax Credit Certified Technician<br /> Wind: Must be installed in an area with average wind speeds of at least 10 mph at the proposed installation height based on either a state or national wind resource map for that region, or at least one year of site specific wind speed and direction data<br /> Hydro Electric: Must be installed outside of environmentally protected areas and in accord with all applicable water rights and FERC exemptions or permits.  +
Central Lincoln People's Utility District - Residential Energy Efficiency Rebate Programs (Oregon) +Heat Pumps: must be installed and certified by an approved HVAC contractor on BPA’s Approved Contractor list<br />  +
Chelan County PUD - Residential Weatherization Rebate Program (Washington) +Replaced windows and patio doors must be single-pane or double-pane with a metal frame and rated by the National Fenestration Rating Council (NFRC)<br /> Replacement Windows: U-factor of .30 or lower<br /> Replacement Doors: U-factor of .35 or lower<br /> Insulation: Must increase insulation level by R-10 or greater<br /> Insulation must be installed only where cavities separate conditioned from unconditioned areas  +
Cheyenne Light, Fuel and Power (Gas) - Commercial and Industrial Efficiency Rebate Program (Wyoming) +Contact Cheyenne Light, Fuel and Power  +
Cheyenne Light, Fuel and Power (Gas) - Residential Energy Efficiency Rebate Program (Wyoming) +Contact Cheyenne Light, Fuel and Power  +
Citizens Gas - Commercial Efficiency Rebates (Indiana) +Steam Trap Service: Only available for the replacement of steam traps that are leaking steam  +
City Utilities of Springfield - Commercial Energy Efficiency Rebate Program (Missouri) +Applicant will be given 90 days to install the qualifying equipment and provide the information stated in the guidelines  +
City Utilities of Springfield - Residential Energy Efficiency Rebate Program (Missouri) +Green Building Rebate is only available when combined with City Utilities ENERGY STAR® Home Rating Rebate Program. <br /> Customer must select an HVAC contractor who is qualified to perform a Manual J load calculation.  +
City Water Light and Power - Residential Energy Efficiency Rebate Programs (Illinois) +Heat pumps must be installed with a new A-coil, be ARI-listed, and be installed by a licensed HVAC contractor in a property that receives CWLP electric service<br />  +
City of Atlanta - Sustainable Home Initiative in the New Economy (SHINE) Program (Georgia) +Installations must be completed by SHINE-qualified contractors participating in Georgia Power Home Energy Improvement Program  +
City of Aurora – Residential Energy Efficiency & Conservation Rebate Program (Colorado) +New construction is not eligible.<br /> <br /> Material/system installation must be done by a professional contractor who is registered with Xcel Energy. Do-it-yourself installations do not qualify. <br />  +
City of Aurora – Solar Domestic Water Heater Rebate (Colorado) +Systems must be installed by a solar or wind contractor with a business license to operate in Colorado.<br /> The system must be installed to meet a minimum optimum orientation output of 80%.<br /> Participants must first receive a blower door energy audit (for residential buildings) or an energy assessment (for commercial properties) from Xcel Energy.  +
City of Bainbridge Island - (Re)Power Bainbridge Rebate Program (Washington) +Installations must be performed by a (Re)Power trade ally  +
City of Boston - Renew Boston Residential Retrofit Program (Massachusetts) +Renew Boston determines eligibility and installs recommended improvements directly for participating residents.  +
City of Boston - Renew Boston Solar Program (Massachusetts) +Not specified  +
City of Cambridge - Cambridge Energy Alliance Solar Hot Water Grant (Massachusetts) +Shading, tilt, and orientation requirements apply  +
City of Chicago - Small Business Improvement Fund (Illinois) +Must be located in a Tax Increment Financing District (TIF)  +
City of Danville Utilities - Residential Energy Efficiency Rebate Program (Virginia) +Attic Insulation (Tier 1): Final insulation value of R-38 or greater<br /> Attic Insulation (Tier 2): Final insulation value of R-60 or greater  +
City of Duluth - Residential Energy Efficiency Rebate Program (Minnesota) +Equipment must be installed by contractor qualified by City of Duluth  +
City of Elyria - Energy Smart Home Program (Ohio) +Must use a licensed and registered contractor (per Elyria Building Department rules). The City can provide a list of approved contractors.  +
City of Fredericksburg - Home Performance with Energy Star (Virginia) +Varies by technology  +
City of Gridley Utilities - PV Buy Down Program (California) +Systems must be installed by appropriately licensed California solar contractors<br />Systems must be installed by appropriately licensed California solar contractors<br />  +
City of High Point Electric - Residential Energy Efficiency Rebate Program (North Carolina) +Heat Pumps: must be installed by an authorized/licensed electrical or HVAC contractor who has a privilege license to work in the City of High Point <br /> Water Heaters: must be installed by an authorized/licensed plumbing contractor who has a privilege license to work in the City of High Point  +
City of Houston - Energy Efficiency Incentive Program (Texas) +Existing building must have a minimum of 7,500 square feet of office space, must be a member of the City of Houston’s Green Office Challenge Program, an energy audit of the building must be performed by either a CEM or licensed Texas Professional Engineer, the energy audit must identify a minimum energy savings of 15%, and the minimum cost of the retrofit project must be 100K.  +
City of Lakewood - DIY Attic Insulation Rebate (Colorado) +Only retrofit projects are eligible, not new construction  +
City of Lakewood - Solar Permit Fee Rebate (Colorado) +Must be installed by homeowner or a contractor registered with the City of Lakewood  +
City of Lompoc Utilities - PV Rebate Program (California) +Systems must be installed by an appropriately licensed California solar installer if not installed by the system owner.  +
City of Long Beach - Residential Energy Efficiency and Solar Water Heating Rebate Program (California) +Must be installed by a licensed contractor.  +
City of Longwood - Raising Energy Efficiency Rebate Program (Florida) +Owner occupied residences only<br /> Must use local contractors, suppliers or other business located within Longwood city limits  +
City of New Bern Electric Department - Residential Energy Efficiency Rebate Program (North Carolina) +Load management switches must be installed on the appliances, or the existing switch must be reconnected to the new heat pump or water heater.  +
City of North St. Paul Electric Utility - Residential Energy Efficiency Rebate Program (Minnesota) +Air conditioners and appliances must be installed where electric service is provided by The City of North St. Paul/MMPA on a retail basis.  +
City of Ocala Electric Utility - Residential Energy Efficiency Rebate Program (Florida) +Heat pump installation must be performed by a Florida state licensed Heating Air Conditioning, Refrigeration and Ventilation (HARV) or mechanical contractor  +
City of Palo Alto Utilities - Commercial Energy Efficiency Rebate Program (California) +All equipment must be purchased and installed within 6 months of application approval<br /> Equipment must be installed by a licensed contractor<br />  +
City of Palo Alto Utilities - PV Partners (California) +PV systems must be grid-connected; must be installed by a licensed contractor.  +
City of Palo Alto Utilities - Smart Energy Rebate Program (California) +Applications must be postmarked and submitted no later than 90 days after purchase/install date<br /> New construction projects are not eligible for insulation rebates  +
City of Palo Alto Utilities - Solar Water Heating Program (California) +Systems must be installed by a contractor with an active A, B, c-4, C-36 or C-46 license. Self-installers are not required to be licensed, but must attend a one-day training workshop. Contractors are also required to attend the one-day training workshop.  +
City of San Francisco - Residential Efficiency Rebates (California) +Customers must use a participating contractor  +
City of San Marcos - Distributed Generation Rebate Program (Texas) +System must be professionally designed and installed by a City-approved contractor and must be interconnected to the City's electric distribution system.  +
City of St. George - Energy Star Appliance Rebate Program (Utah) +Hot Water Heater rebates only available in "all electric" homes  +
City of Sunset Valley - PV Rebate Program (Texas) +System installation cost limit: 6/kW or less  +
City of Tallahassee Utilities - Solar Water Heating Rebate (Florida) +Must be installed by a state-certified solar or plumbing contractor  +
Clallam County PUD - Residential Efficiency Rebate Program (Washington) +Weatherization measures must be installed by Bonneville Power <br /> Administration-certified or PUD-approved installers<br />  +
Clallam County PUD - Residential Energy Efficiency Rebate Program (Washington) +Insulation, air sealing and mechanical ventilation rebates are only available for manufactured homes. Site-built homes cannot receive these rebates.  +
Clallam County PUD - Residential Solar Rebate Program (Washington) +Solar systems must be installed by an approved contractor  +
Clark Public Utilities - Commercial Energy Efficiency Rebate Programs (Washington) +Outdoor Ductless Heat Pump: must be installed in facility with less than 5,000 square feet of conditioned space<br /> Window Retrofit: must be installed in wood-framed, electrically heated facility with less than 5,000 square feet of conditioned space  +
Clark Public Utilities - Residential Energy Efficiency Rebate Program (Washington) +Energy Star Heat Pumps must meet the PTCS standards.  +
Clean Energy Solutions ARRA CHP Program (New Jersey) +Electricity generated should be consumed on-site to the maximum extent feasible  +
Clean Energy Solutions Large Scale CHP and Fuel Cells Program (New Jersey) +Must be a stationary system installed on the customer side of the meter <br /> It should be installed in NJ  +
Clean-Burning Wood Stove Grant Program (Maryland) +Must replace an existing electric or non-natural gas fossil fueled heating system in a primary residence  +
Cleveland Electric Illuminating Company - Home Performance with ENERGY STAR Rebates (Ohio) +Installation must be performed by a Building Analyst certified contractor who is participating under the FirstEnergy Home Performance with ENERGY STAR Program.  +
Cloverland Electric Company (Efficiency United) - Commercial and Industrial Rebate Program (Michigan) +Occupancy Sensors: Socket based sensors do not qualify<br /> Custom: Once project is approved, customers has 90 days to complete project and submit application<br />  +
Cloverland Electric Company (Efficiency United) - Residential Energy Efficiency Rebate Program (Michigan) +Central AC/ECM Blower Motor: Must be installed by licensed contractor<br />Central AC/ECM Blower Motor: Must be installed by licensed contractor<br />  +
CoServ - Solar Energy Rebate (Texas) +There is a pre and post inspection  +
CoServ Electric Cooperative - Commercial Energy Efficient Lighting Rebate Program (Texas) +A CoServ Field Technician must visit the place of business for pre-inspection and post-inspection  +
Coast Electric Power Association - Comfort Advantage Home Program (Mississippi) +Home must meet the standards of the Comfort Advantage Home Program  +
Cobb EMC - Solar Rebate Program (Georgia) +Must be installed by a licensed contractor<br /> Must be installed in accordance with all building and electric codes<br /> Must be interconnected  +
Coldwater Board of Public Utilities - Commercial & Industrial Energy Efficiency Rebate Program (Michigan) +See program web site  +
Colorado - Commercial Renewable Energy Rebate Program (Colorado) +Systems must be grid-tied and must be completed by a contractor listed in the GEO Service Provider Database. All applications must be submitted by a contractor on behalf of the commercial applicant.  +
Colorado - Residential Energy Efficiency Rebate Program (Colorado) +Clothes washers, dishwashers and refrigerators can be self-installed. All other equipment must be installed by a contractor.  +
Colorado - Residential Renewable Energy Rebate Program (Colorado) +Work must be done by a contractor listed in the vendor database on the program website  +
Colorado Natural Gas - Energy Efficiency Rebate Program (Colorado) +Hot Water Insulation/Infiltration Measures: minimum purchase of $40<br />  +
Colorado Springs Utilities - Energy Efficient Builder Program (Colorado) +ENERGY STAR® certified home  +
Columbia Gas of Ohio - Home Performance Solutions Program (Ohio) +Equipment must be installed by eligible contractor.  +
Columbia Gas of Ohio - Small Business Energy Efficiency Program (Ohio) +Applicant must own or lease small business property and use an average of 3000 Ccf or less natural gas annually.  +
Columbia River PUD - Commercial Energy Efficiency Rebate Programs (Oregon) +Lighting: Projects must reduce the connected wattage of affected fixtures by at least 25%<br /> Weatherization: businesses must primarily heat with permanently installed electric heat; all measures must result in at least a 20% improvement in thermal efficiency<br /> Heat Pumps: must be installed by a participating dealer<br />  +
Columbia River PUD - Commercial Lighting Retrofit Program (Oregon) +Projects must reduce the connected wattage of affected fixtures by at least 30% (occupancy sensors and programmable setback thermostats are exempt from this requirement). All projects shall utilize products that are ENERGY STAR® rated, if available.  +
Columbia River PUD - ENERGY STAR Light Fixture Rebate Program (Oregon) +The utility may choose to verify that customers have installed the ENERGY STAR qualified light fixtures by visiting their home.  +
Columbia River PUD - Furnace Duct Sealing Program (Oregon) +A PTCS Certified Residential Air Distribution Systems Technician must complete the work.  +
Columbia River PUD - Heat Pump Rebate Program (Oregon) +Heat pumps must be installed by a participating heat pump dealer.  +
Columbia River PUD - New Appliance Rebate Program (Oregon) +Program is offered to all Columbia River PUD customers for appliances installed in new or exisiting homes or businesses within the PUD service area.  +
Columbia River PUD - Residential Energy Efficiency Rebate Programs (Oregon) +Duct Sealing: must be done by a PTCS Certified Technician<br /> Heat Pumps: must be installed by a participating heat pump dealer<br /> Air-source/Geothermal Heat Pumps: PTCS commissioning required, PTCS ducts are required if the ductwork is outside of the home's heated space  +
Columbia River PUD - Water Heater Rebate Program (Oregon) +The tank must be installed in a home or business served by Columbia River PUD.  +
Columbia Water & Light - HVAC and Lighting Efficiency Rebates (Missouri) +HVAC: A heating and cooling system duct work inspection will be completed by Columbia Water and Light before the rebate is issued.  +
ComEd - Smart Ideas for Business Efficiency Program (Illinois) +Retro-commissioning: must be willing to spend $10,000 or $20,000 (depending on project size) to implement identified measures.  +
ComEd - Smart Ideas for Business New Construction (Illinois) +Must exceed current International Energy Conservation Code (IECC).<br /> Buildings must be privately owned commercial, industrial or multifamily buildings of at least 20,000 square feet or 100,000 square feet in cases of multifamily occupancy.<br /> Qualifying projects include new construction, additions, change of use or major renovations of existing space by gutting and replacing at least two systems (lighting, controls, HVAC, envelope).  +
ComEd, Nicor Gas, Peoples Gas & North Shore Gas - Bonus Rebate Program (Illinois) +Qualifying systems must be tied to same gas account  +
Commercial & Industrial Solar Rebate Program (New Hampshire) +Pre-approval required  +
Commercial Clean Energy Grant Program (Maryland) +Installer NABCEP certification will be required for PV systems  +
Commercial Energy Efficiency Rebate Program (Hawaii) +VFD Domestic Water Pump System: Retrofit only  +
Commercial Lighting and LED Lighting Incentives (Vermont) +Prescriptive rebates available for projects (new or renovations) less than 10,000 sq. ft.  +
Commercial Scale Wind Incentive Program (Oregon) +Project must be grid-connected deliver power to Portland General Electric or Pacific Power in Oregon  +
Commercial Small Wind Rebate Program (Minnesota) +Minimum wind speed of 12 mph at hub height<br /> Wind systems must be installed by an appropriately licensed and bonded contractor  +
Commercial Solar Thermal Incentive Program (Connecticut) +Must be installed by eligible installer and must install performance metering equipment.  +
Commercial, Industrial and Institutional Solar Electric Program (Rhode Island) +Systems must meet orientation and shading guidelines, must be located in Narragansett Electric or Pascoag Utility District, and must meet all applicable state codes and/or OER regulations.  +
Commonwealth Hydropower Program (Massachusetts) +Non-conduit feasibility projects must result in an increase in energy generation by at least 200,000 kWh/year (average) and all construction and design projects must result in an increase in energy generation by at least 50,000 kWh per year.  +
Commonwealth Solar Hot Water Commercial Program (Massachusetts) +Must be installed where the collectors will receive at least 5 hours of sunlight a day (75% shade-free).  +
Commonwealth Solar Hot Water Residential Program (Massachusetts) +Shading, tilt, and orientation requirements apply<br />Shading, tilt, and orientation requirements apply<br />  +
Commonwealth Solar II Rebates (Massachusetts) +Projects must be installed in compliance with all local, state, and/or federal building and electrical laws, codes and practices. Electrical work must be performed by a Massachusetts licensed electrician. NABCEP certification recommended. Projects must have a minimum 5-year warranty provided by the installer against defective workmanship, project or component breakdown, or degradation in electrical output of more than 15% from original rated electrical output during the warranty period.  +
Commonwealth Wind Commercial Wind Program (Massachusetts) +Project must serve the wholesale electricity market, or serve an on-site load but does not qualify for net metering. Project must be land-based.  +
Commonwealth Wind Incentive Program – Micro Wind Initiative (Massachusetts) +Electrical work must be performed by MA licensed electrician. Must be grid-connected and comply with all federal, state and local codes, and NEC standards. Project must be pre-approved, but there is no list of pre-approved contractors. (See program guidelines for specifications regarding wind-energy installations.)  +
Commonwealth Woodstove Change-Out Pilot Program (Massachusetts) +New stoves must be professionally installed and the installation must be coordinated and certified by the retailer. Old stoves must be permanently removed from service and rendered unusable. All applicable federal, state and local building codes and regulations, safety standards and certifications must be adhered to.  +
Community Renewable Energy Feasibility Fund Program (Oregon) +Electric generation projects must aim to be sized 25 kW to 10 MW  +
Compressed Air Systems (Vermont) +Prescriptive rebates available for projects (new or renovations) less than 10,000 sq. ft.  +
ConEd (Electric) - Commercial and Industrial Energy Efficiency Program (New York) +To receive rebate for installation, must be an existing directly metered commercial or industrial building, which pays the System Benefits Charge, and has not received an incentive from NYSERDA or another utility.  +
ConEd (Electric) - Multifamily Energy Efficiency Incentives Program (New York) +Equipment must be installed in ConEd eligible service area  +
ConEd (Electric) - Residential Energy Efficiency Incentives Program (New York) +Eligible equipment must be installed by a participating contractor<br />Eligible equipment must be installed by a participating contractor<br />  +
ConEd (Gas) - Commercial and Industrial Energy Efficiency Program (New York) +To receive rebate for installation, must be an existing directly metered commercial or industrial building, which pays the System Benefits Charge, and has not received an incentive from NYSERDA or another utility.  +
Connecticut - Residential Energy-Efficient Appliance Rebates (Connecticut) +Must replace an older, less-efficient appliance  +
Connecticut Light & Power - Express Rebate Programs (Connecticut) +CLandP must pre-approve applications for Cool Choice rebates of 5,000 or more. Lighting rebate customers are responsible for disposal of all discarded ballasts/lamps according to local, state and federal guidelines.  +
Connecticut Light & Power - Small ZREC Tariff (Connecticut) +Must be located behind the meter and have a dedicated ZREC meter <br />  +
Connexus Energy - Residential Efficient HVAC Rebate Program (Minnesota) +All equipment must be installed by a certified HVAC contractor  +
Consolidated Electric Cooperative - Heat Pump and Water Heating Rebates (Ohio) +Heat pumps installed with a dual-fuel system must have a radio control switch (which may be used during summer peak load to cycle A/C)  +
Consumers Energy (Electric) - Commercial Energy Efficiency Program (Michigan) +Project savings must be sustainable for a period of five years or for the life of the product, whichever is less  +
Consumers Energy (Gas) - Commercial Energy Efficiency Program (Michigan) +Project savings must be sustainable for a period of five years or for the life of the product, whichever is less  +
Consumers Energy - Experimental Advanced Renewable Program (Michigan) +Must sign Generator Interconnection and Operating Agreement  +
Consumers Power, Inc - Residential Energy Efficiency Rebate Program (Oregon) +PTCS Duct Certification and Heat Pump bid(s) must be performed by a PTCS certified duct sealing contractor  +
Consumers Power, Inc. - New Homes Energy Efficiency Program (Oregon) +Incentives apply to new construction only, remodeled homes are not eligible. Homes must be pre-approved for incentive prior to start of construction.  +
Consumers Power, Inc. - Solar Energy System Rebate (Oregon) +Systems must be installed by a State of Oregon certified contractor and applications must be pre-approved by Consumers Power  +
Cookeville Electric Department - Residential Energy Efficiency Rebate Program (Tennessee) +Heat pump must be installed by a member of the Quality Contractor Network  +
Corn Belt Energy Coop - Commercial Energy Efficiency Rebate Program (Illinois) +Pre-approval required for projects with incentive payments greater than $2,000  +
Corona Department of Water & Power - Solar Partnership Rebate Program (California) +Must be grid-connected and installed by appropriately licensed  +
Cowlitz County PUD - Commercial Energy Efficiency Rebate Programs (Washington) +Lighting: for retrofits, customers must ensure that all lighting materials are disposed of or recycled in accordance with current environmental laws.  +
Cowlitz County PUD - H2 AdvantagePlus Residential Heat Pump Program (Washington) +Both new and existing site-built homes are eligible. Homes must have ceiling insulation of R-19 or more, where possible. PUD pre-approved heat pump contractors must be used in order to qualify for funding.  +
Crow Wing Power - Residential Energy Efficiency Rebate Program (Minnesota) +Rebates apply to new or replacement installations, and must be controlled on an approved Load Management program.  +
Cuivre River Electric - Energy Efficiency Rebate Programs (Missouri) +Geothermal Heat Pumps: must be installed with a Delta-T of 80 degrees<br />  +
Cuivre River Electric - Residential Energy Efficiency Rebate Programs (Missouri) +Clothes washers and dishwashers must be used in conjunction with an electric water heater<br /> Geothermal Heat Pumps: must be installed with a Delta-T of 80 degrees<br />  +
Cumberland EMC - Energy Efficient New Homes Program (Tennessee) +Heat Pumps must be installed by a QCN member.  +
Custom Renewable Energy Projects (Oregon) +Must be in or able to deliver power to the service territory of either Portland General Electric or Pacific Power; off grid projects are not eligible. Projects must be less than 20 MW in capacity.  +
D
DCEO - Community Renewable Energy Grant Program (Illinois) +Installer must be licensed to do business in Illinois and carry sufficient insurance  +
DCEO - Solar Energy Incentive Program (Illinois) +Installers must be licensed to transact business in Illinois and maintain "appropriate types and levels of insurance coverage"  +
DEMEC - Green Energy Program Incentives (Delaware) +Systems must be installed by a participating contractor  +
DEMEC Member Utilities - Green Energy Program Incentives (8 utilities) (Delaware) +Systems must generally be installed by a participating contractor; grid-connected or off-grid systems are eligible; solar PV and solar thermal systems must meet orientation, shading, and aesthetics requirements; wind energy systems may be reviewed for wind resource adequacy  +
DO NOT USE - Delaware Electric Cooperative - Green Energy Program Incentives (Delaware) +Systems must be installed by a participating contractor  +
DTE Energy (Electric) - Residential Energy Efficiency Program (Michigan) +See program brochure  +
DTE Energy (Gas) - Residential Energy Efficiency Program +See program web site<br /> MichCon Customers are likely to get half of the rebate that a MichCon and Detroit Edison Customer would receive  +
DTE Energy - Commercial New Construction Energy Efficiency Program (Michigan) +The incentive amount for new construction and remodeling projects is applicable for projects that are at least 10% more energy efficient than a baseline building designed to ASHRAE 90.1-2007 Standards. The following incentives are paid to DTE Energy customers based on the calculated energy savings (first year only) according to the level of efficiency over the baseline.  +
DTE Energy - Solar Currents Program (Michigan) +Systems must be grid-tied and net metered; installations must meet all applicable federal, state, local, and manufacturer's codes and standards and be installed in accordance with DTE Interconnection Guidelines.  +