U
1001

Property:Incentive/InstallReqs

From Open Energy Information

Property Name Incentive/InstallReqs
Property Type Text
Description Installation Requirements.

Pages using the property "Incentive/InstallReqs"

Showing 100 pages using this property.

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

A
AEP Ohio - Commercial New Construction Energy Efficiency Rebate Program (Ohio) +Equipment must be new<br /> Eligible lamps and ballasts are listed on the Consortium for Energy Efficiency (CEE) website  +
AEP Ohio - Commercial Self Direct Rebate Program (Ohio) +To be eligible, participants must use more than 700,000 kWh or have a national/regional account with multiple facilities in one or more states.  +
AEP Ohio - Renewable Energy Credit (REC) Purchase Program (Ohio) +Customer must have an interconnection agreement with AEP Ohio  +
AEP Ohio - Renewable Energy Technology Program (Ohio) +All necessary permits and inspections must be obtained.<br /> All customers must take service under the Company's Schedule Net Energy Metering Service, and all equipment must comply with AEP Ohio's Interconnection Requirements. Additional requirements apply.  +
AEP SWEPCO - SCORE Program (Texas) +Cash Incentive: New Construction and Renovations only  +
AEP SWEPCO - SMART Source Solar PV Program (Texas) +Systems must be grid-connected and installed on the customer's side of the meter; estimated system performance must be at least 80% of optimal, unshaded output as measured by PVWatts; Must use Service Provider from the registered Service Provider list (specific eligibility requirements)  +
AEP Texas Central Company - SCORE Program (Texas) +Cash Incentive: New Construction and Renovations only  +
AEP Texas Central Company - SMART Source Solar PV Rebate Program (Texas) +Systems must be grid-connected and installed on the customer's side of the meter; estimated system performance must be at least 80% of optimal, unshaded output as measured by PVWatts; Must use Service Provider from the registered Service Provider list (specific eligibility requirements)  +
AEP Texas North Company - SCORE Program (Texas) +Cash Incentive: New Construction and Renovations only  +
AEP Texas North Company - SMART Source Solar PV Rebate Program (Texas) +Systems must be grid-connected and installed on the customer's side of the meter; estimated system performance must be at least 80% of optimal, unshaded output as measured by PVWatts; Must use Service Provider from the registered Service Provider list (specific eligibility requirements)  +
APS - Renewable Energy Incentive Program (Arizona) +PV systems must be installed by a licensed contractor holding one or more of the following certifications with the Arizona Registrar of Contractors: C-11, K-11, L-11. <br /> SWH systems must be installed by a licensed contractor holding one or more of the following certifications with the Arizona Registrar of Contractors, C-37, C-37R, K-77, K-78, L-77, L-78.  +
APS - Residential Energy Efficient Rebate Program (Arizona) +For the APS AC Rebate, units must be installed by an APS qualified contractor.<br /> For the Duct Test and Repair Rebate, tests and repairs must be done by a Building Performance Institute (BPI) Certified Contractor.  +
Agricultural Energy Efficiency Program (New York) +Improvements in farm residences are not eligible for incentives  +
Agricultural Lighting and Equipment Rebate Program (Vermont) +Must be installed in agricultural operations; rebate reservation is required and pre-approval is required for projects with rebate payments greater than $5000.  +
Agricultural Pumping Efficiency Program (California) +The project must be completed within 20 months of an acceptable pump efficiency test, performed before the retrofit project.  +
Alabama - Residential Energy-Efficient Appliance Rebate Program (Alabama) +Appliance must be purchased on or after the program's start date  +
AlabamaWISE Home Energy Program (Alabama) +Auditors must be BPI-certified and approved by Nexus Energy Center. Installers must be approved and agree to quality assurance by Nexus Energy Center.  +
Alameda Municipal Power - Solar Photovoltaics Rebate Program (California) +Must be grid-connected and installed by appropriately licensed contractor  +
Alaska - Residential Energy-Efficient Appliance Rebate Program (Alaska) +Appliance must be purchased on or after the program's start date  +
Alexandria Light and Power - Residential Energy Efficiency Rebate Program (Minnesota) +Energy Star Appliances must be installed within Alexandria Light and Power's service territory<br /> A copy of the original dated sales receipt must be included with application<br /> Equipment must be installed by December 31 of current program year<br />  +
Alliant Energy (Wisconsin Power & Light) - Renewable Incentives Grant Program (Wisconsin) +Systems must meet all Focus on Energy installation requirements and all WPL Customer-owned generation requirements  +
Alliant Energy Interstate Power and Light (Electric) - Business Energy Efficiency Rebate Programs (Iowa) +Alliant Energy must supply primary energy.  +
Alliant Energy Interstate Power and Light (Electric) - Business Energy Efficiency Rebate Programs (Minnesota) +Alliant Energy must supply primary energy.  +
Alliant Energy Interstate Power and Light (Electric) - Residential Energy Efficiency Rebate Program (Minnesota) +See program web site  +
Alliant Energy Interstate Power and Light (Gas) - Business Energy Efficiency Rebate Programs (Minnesota) +Alliant Energy must supply primary energy.  +
Alliant Energy Interstate Power and Light (Gas) - Residential Energy Efficiency Program +Alliant Energy must supply primary heating energy. Home must be built before January 1, 2001. Renters need owner’s prior approval (Alliant Energy can contact owner). A Home Energy Audit must be completed before new insulation is installed.  +
Alliant Energy Interstate Power and Light - Business and Farm Renewable Energy Rebates (Iowa) +The system must offset on-site electric usage  +
Alpena Power Company (Efficiency United) - Commercial and Industrial Rebate Program (Michigan) +Occupancy Sensors: Socket based sensors do not qualify<br /> Custom: Once project is approved, customers has 120 days to complete project and submit application<br />  +
Alpena Power Company (Efficiency United) - Energy Efficiency Assistance Program (Michigan) +Approved weatherization agencies and subcontractors will perform installations  +
Alpena Power Company (Efficiency United) - Residential Energy Efficiency Rebate Program (Michigan) +Central AC Unit/ECM Blower: installed by licensed contractor<br />Central AC Unit/ECM Blower: installed by licensed contractor<br />  +
Alternative Energy Production Tax Credit (Corporate) (Pennsylvania) +All projects are subject to audit and on-site inspection to verify reported information  +
Alternative Power & Energy Grant Program (Indiana) +Project construction cannot begin until after award notification.  +
Ameren Illinois (Electric) - Commercial Kitchen and Grocery Incentives Program (Illinois) +All projects over 10,000 must receive pre-approval from Ameren<br />All projects over 10,000 must receive pre-approval from Ameren<br />  +
Ameren Illinois (Electric) - Custom, HVAC, and Motor Business Efficiency Incentives (Illinois) +All projects over $10,000 must receive pre-approval from Ameren<br /> Retro-Commissioning (compressed air): minimum of 100 hp (total), at least two compressors, and has been at least two years since the last major upgrade/tune-up<br /> Retro-Commissioning (health care facility): facility must be 100,000 sq. ft. or larger<br /> Leak Survey and Repair projects do not require pre- approval<br /> Retro-Commissioning projects must receive pre-approval from ActOnEnergy. Payback period for implementation incentives must be between 1 and 7 years.See individual project guides for program requirements.  +
Ameren Illinois (Electric) - Multi-Family Properties Energy Efficiency Rebate Program (Illinois) +Electrical contractor must be a Program Ally  +
Ameren Illinois (Electric) - Residential Energy Efficiency Rebates (Illinois) +HVAC: must be installed by Ameren approved-list of HVAC contractors.  +
Ameren Illinois (Gas) - Business Efficiency Incentives (Illinois) +All projects over $10,000 must receive pre-approval from Ameren Illinois <br /> Retro-Commissioning (Healthcare facility) must be 100,000 sq. ft. or larger  +
Ameren Illinois (Gas) - Residential Energy Efficiency Rebates (Illinois) +Equipment: must be installed by Ameren approved-list of contractors.  +
Ameren Illinois - Lighting Rebates for Businesses (Illinois) +All projects with incentive requests greater than $10,000 require pre-approval from ActOnEnergy<br />  +
Ameren Illinois Utilities - Small Business Energy Efficiency Incentive Program (Illinois) +Programmable Thermostat: Facility must have less than 400 kW demand<br />Programmable Thermostat: Facility must have less than 400 kW demand<br />  +
Ameren Missouri - MultiFamily Income Qualified Program (Missouri) +Building Program Partners are eligible if they are owners and managers of HUD-financed and USDA-financed multifamily buildings with three dwelling units or more and some reserved for income-qualified residents.<br /> Participants must apply to improve common areas of the building.  +
Ameren Missouri - Photovoltaic Rebate Program (Missouri) +System must be grid tied, net metered, and permanently installed on the customer's property  +
Anaheim Public Utilities - Green Building Rebate Program (California) +Contact APU to set up the initial consultation.  +
Anaheim Public Utilities - Greener Cleaners Energy Efficiency Incentive Program (California) +Qualifying businesses must select, purchase, and install new equipment within 90 days.  +
Anaheim Public Utilities - PV Buydown Program (California) +The installer must be a properly licensed California contractor with an active General Contractor A or B, C-10 or C-46 license  +
Anoka Municipal Utility - Residential Energy Efficiency Rebate Program (Minnesota) +To apply for an appliance rebate customers must fill out an AMU rebate form and attach a copy of a dated sales receipt. Rebate forms must be submitted within 6 months of the purchase date.  +
Arkansas - Residential Energy-Efficient Appliance Rebate Program (Arkansas) +Appliance must be purchased on or after the program's start date  +
Ashland Electric Utility - Residential Energy Efficiency Rebate Programs (Oregon) +Window Replacements and Insulation: requires energy audit performed by the City before installation<br /> Heat Pump: must be installed and commissioned by a heating contractor on the City's approved list  +
Assisted Home Performance Grants (New York) +Measures must be installed by BPI certified contractor  +
Atmos Energy (Gas) - Residential Efficiency Program (Iowa) +Installed equipment must be new and Energy Star qualified; a separate form should be filled out for each technology.  +
Atmos Energy (Gas) - Residential Efficiency Program (Missouri) +Installed equipment must be new and Energy Star qualified; a separate form should be filled out for each technology.  +
Atmos Energy - Natural Gas and Weatherization Efficiency Program (Kentucky) +Installed equipment must be new and Energy Star qualified; a separate form should be filled out for each technology.  +
Austin Energy - Energy Miser Vending Products Program (Texas) +Must remain installed on a refrigerated non-perishable soft drink machine, reach-in cooler, or non-refrigerated snack machine in a facility served by Austin Energy for a period of 5 years.  +
Austin Energy - Multi-Family Energy Efficiency Rebate Program (Texas) +All work shall be performed in accordance with all applicable manufacturer's instructions and recommendations. Additionally, all applicable requirements of the City of Austin building code, mechanical code, electrical code, plumbing code, energy code and all federal and local laws and regulations for capturing, reclaiming and disposal of ozone depleting compounds must be met. The building's in-house maintenance staff or a contractor may perform most work. Air conditioning work must be performed by a person holding a valid Texas Air Conditioning and Refrigeration Contractors' License or by the licensed contractor's designee.  +
Austin Energy - Residential Energy Efficiency Rebate Program (Texas) +Work must be performed by a participating contractor  +
Austin Energy - Residential Solar PV Rebate Program (Texas) +Must be grid-connected. Must use a solar installer from the Austin Energy Registered Installer List. Solar installers must have at least one employee certified by the North American Board of Certified Energy Practitioners (NABCEP). Homes must meet pre-determined energy efficiency requirements in order to qualify for a rebate.  +
Austin Energy - Solar Water Heating Rebate (Texas) +Must be installed by a licensed contractor; <br /> Equipment must meet all applicable Austin city codes and adhere to the city building permit process  +
Austin Energy - Value of Solar Residential Rate (Texas) +System must be interconnected with Austin Energy electric distribution system  +
Austin Utilities - Solar Rebate Program (Minnesota) +Systems must be installed by a licensed, qualified professional<br /> An energy audit must be conducted prior to installation  +
Avista Utilities (Electric) - Commercial Energy Efficiency Incentives Program (Idaho) +PC Power Management Software: Must achieve minimum average savings of 120 annual kWh per controlled PC<br />  +
Avista Utilities (Electric) - Commercial Energy Efficiency Incentives Program (Washington) +PC Power Management Software: Must achieve minimum average savings of 120 annual kWh per controlled PC<br />  +
Avista Utilities (Electric) - Commercial Food Equipment Rebates (Washington) +Tank Dishwashers: Primary water heat source must be electric  +
Avista Utilities (Electric) - Commercial Lighting Energy Efficiency Program (Idaho) +Incentives are for Avista customers of rate schedules 11 or above.  +
Avista Utilities (Electric) - Commercial Lighting Energy Efficiency Program (Washington) +Incentives are for Avista customers of rate schedules 11 or above.  +
Avista Utilities (Electric) - Residential Energy Efficiency Rebate Programs (Idaho) +Insulation: New insulation that increases the R-Value by R10 or greater<br /> Air Source Heat Pump: 8.5 HSPF, 14 SEER (single family homes); 7.7 HSPF, 13 SEER (manufactured homes)<br /> Other equipment: Must meet the efficiency requirements on the program web site.  +
Avista Utilities (Electric) - Residential Energy Efficiency Rebate Programs (Washington) +Replacement of Electric Straight Resistance (electric forced air furnace or electric baseboard heat) as Primary Heat: Can be replaced with an electric heat pump or an efficient gas central heating system.  +
Avista Utilities (Gas) - Prescriptive Commercial Incentive Program (Oregon) +Furnaces 135 mmbtu or less: kitchen equipment and site specific sizes vary.  +
Avista Utilities - Commercial Energy Efficiency Incentives Program (Idaho) +PC Power Management Software: Must achieve minimum average savings of 120 annual kWh per controlled PC<br /> Electric to Natural Gas Water Heater Conversion: Water heaters must be 80 gallons or smaller with an Efficiency Factor greater than .60 AFUE or 90% in a building less than 4000 sq. ft.<br /> Demand Controlled Ventilation System: Must be an existing building keeping temperatures between 65º and 75º F during operating hours.  +
Avista Utilities - LEED (NC or EB) Certification Energy Efficiency Rebate Program (Idaho) +Applicants must register their project with the U.S. Green Building Council (USGBC).  +
Avista Utilities - LEED (NC or EB) Certification Incentive Program (Washington) +Register project with the U.S. Green Building Council (USGBC)  +
Avista Utilities - Site-Specific Energy Efficiency Incentives (Washington) +To be eligible for incentives, you need to contact Avista in the early stages of project development. Incentives will not be paid on projects that are already under construction or that are being developed without Avista's involvement.  +
Azusa Light & Water - Solar Partnership Program (California) +Installer must be a properly licensed California contractor with an active A, B, C-10 or C-46 license  +
B
Baltimore Gas & Electric Company (Electric) - Commercial Energy Efficiency Program (Maryland) +Facility owner must commit to funding up to $15,000 to match BGE financial incentives.  +
Bandera Electric Cooperative - Residential Heat Pump Rebate Program (Texas) +Must be installed by certified heating, ventilation, and A/C contractor. Heats Pumps must be installed in existing homes.  +
Bangor Hydro Electric Company - Residential and Small Commercial Heat Pump Program (Maine) +Contractor must be a registered installer<br /> Commercial customers must have billing demand of less than 25 kW<br /> The home or business where the heat pump will be installed is owner-occupied  +
Banning Electric Department - Solar Support Program (California) +Must be grid-connected, net metered, and installed by either the system owner or a California contractor with an A, C-10 or C-46 license.  +
Barron Electric Cooperative - Commercial, Industrial, and Agricultural Energy Efficiency Rebate Program (Wisconsin) +Central Air rebates require participation in the Load Management Program  +
Be SMART Home Efficiency Rebate Program (Maryland) +Home energy audit required prior to participation; audit and installation must be performed by a program-approved contractor  +
Beaches Energy Services - Residential Energy Efficiency Rebate Program (Florida) +Heat Pumps: must be installed by an authorized State of Florida Certified Heating, Air Conditioning, Refrigeration and Ventilation (HARV) or mechanical contractor<br />Heat Pumps: must be installed by an authorized State of Florida Certified Heating, Air Conditioning, Refrigeration and Ventilation (HARV) or mechanical contractor<br />  +
Beaches Energy Services - Solar Water Heating Rebate Program (Florida) +Newly constructed homes are not eligible for rebate<br /> Systems must be installed by a licensed Florida contractor according to manufacturer specifications<br /> System must be at least 80% shade free<br /> Systems must be installed prior to the issuance of a rebate  +
Berkeley Electric Cooperative - Energy Efficiency Rebate Program (South Carolina) +Co-op will install load management switch on water heater  +
Berkshire Gas - Residential Energy Efficiency Rebate Program (Massachusetts) +Incentives will be paid directly to installation contractor  +
Biogas and Biomass to Energy Grant Program (Illinois) +Requires a state licensed installer with appropriate insurance coverage  +
Black Hills Energy (Gas) - Commercial Energy Efficiency Program (Colorado) +Insulation, Infiltration Control, Pool/Spa Covers: require a commercial energy evaluation recommendation to be eligible for payout.  +
Black Hills Energy (Gas) - Commercial Energy Efficiency Rebate Programs (Iowa) +Rebates over $10,000 must be pre-approved.<br /> Certain measures require a commercial energy evaluation recommendation to be eligible for payout.  +
Black Hills Energy - Solar Power Program (Colorado) +PV installations are subject to on-site supervision by a NABCEP certified professional to maintain a 3:1 ratio for the installation crew (one certified installer for every three solar installers)  +
Blue Ridge EMC - Residential Solar Water Heating Rebate Program (North Carolina) +Systems must be installed by an [http://www.blueridgeemc.com/greensmart/SWH_Authorized_Dealers_090109.asp authorized installer]  +
Blue Ridge Mountain Electric Membership Corporation - Water Heater Rebate Program (Georgia) +Heat pump installed by a member of Quality Contractor List.  +
Broward County - Energy Sense Appliance Rebate Program (Florida) +Must be current eligible Energy Star appliance  +
Bryan Texas Utilities - Commercial Energy Efficiency Program (Texas) +All installations must be recommended by a BTU energy service advisor.  +
Bryan Texas Utilities - Solar Hot Water Rebate Program (Texas) +Must be installed by a licensed contractor; Equipment must meet all applicable city codes and adhere to the city building permit process  +
Bryan Texas Utilities - Solar PV Rebate Program (Texas) +Must be installed by a BTU certified installer, who must be NABCEP certified within 2 years of registering with BTU; Licensed electrical contractors must obtain all applicable permits and perform all electrical interconnections; Shading no more than 20% annually; azimuth and tilt must be within acceptable limits  +
Butler Rural Electric Cooperative - Residential Rebate Program (Ohio) +Members must use an HVAC dealer from the Cooperative's participating dealers  +
C
CCEF - Affordable Housing Initiative Solar PV Rebate Program (Connecticut) +Installation must comply with all federal, state, and local codes; Must be grid-connected and installed by a pre-approved contractor; Installation must be in service territory of United Illuminating Company or Connecticut Light and Power  +
CEC - New Solar Homes Partnership (California) +Systems must be installed by appropriately licensed California solar contractors<br /> Self-installs are also acceptable<br /> Although not required, installation contractors are encouraged to become certified by the North American Board of Certified Energy Practitioners (NABCEP).<br /> Although not required, installation contractors are encouraged to become certified by the North American Board of Certified Energy Practitioners (NABCEP).<br />  +
CEFIA - Residential Solar PV Rebate Program (Connecticut) +Starting March 1, 2010: applicants must participate in CEEF's Home Energy Solutions (HES) program <br /> Installation must comply with all federal, state, and local codes;<br /> Must be grid-connected and installed by a pre-approved contractor;<br /> Installation must be in service territory of United Illuminating Company or Connecticut Light and Power  +
CL&P - Residential Heating and Cooling Rebates (Connecticut) +Varies  +
CPS Energy (Electric) - Residential Energy Efficiency Rebate Program (Texas) +Only measures installed by a CPS Energy registered contractor are eligible for rebates<br />  +
CPS Energy - Solar Hot Water Rebate Program (Texas) +System must meet all applicable codes and be installed by a CPS Energy registered installer (minimum qualifications apply);<br /> System must be designed for frost protection and scale elimination or remediation  +