Concentrating solar power

From Open Energy Information

Revision as of 09:43, 14 November 2019 by RollbackBot (talk | contribs) (Reverted edits by RkGamerYT (talk) to last revision by Alcauza)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Concentrating Solar Power Basics

(The following text is derived from NREL's concentrating solar power information page.)[1]

Concentrating solar power (CSP) offers a utility-scale, firm, dispatchable renewable energy option that can help meet our nation's demand for electricity. CSP plants produce power by first using mirrors to focus sunlight to heat a working fluid. Ultimately, this high-temperature fluid is used to spin a turbine or power an engine that drives a generator. And the final product is electricity.

Smaller CSP systems can be located directly where the power is needed. Larger, utility-scale CSP applications provide hundreds of megawatts of electricity for the power grid. Both linear concentrator and power tower systems can be easily integrated with thermal storage, helping to generate electricity during cloudy periods or at night. Alternatively, these systems can be combined with natural gas, and the resulting hybrid power plants can provide high-value, dispatchable power throughout the day.

These attributes—along with world-record solar-to-electric conversion efficiencies—make CSP an attractive renewable energy option in the southwestern United States and other sunbelts worldwide.

Many power plants today use fossil fuels as a heat source to boil water. The steam from the boiling water spins a large turbine, which drives a generator to produce electricity. However, a new generation of power plants with concentrating solar power systems uses the sun as a heat source. The three main types of concentrating solar power systems are: linear concentrator, dish/engine, and power tower systems.

Concentrating Solar Power Plant

Linear Concentrator Systems collect the sun's energy using long rectangular, curved (U-shaped) mirrors. The mirrors are tilted toward the sun, focusing sunlight on tubes (or receivers) that run the length of the mirrors. The reflected sunlight heats a fluid flowing through the tubes. The hot fluid then is used to boil water in a conventional steam-turbine generator to produce electricity. There are two major types of linear concentrator systems: parabolic trough systems, where receiver tubes are positioned along the focal line of each parabolic mirror; and linear Fresnel reflector systems, where one receiver tube is positioned above several mirrors to allow the mirrors greater mobility in tracking the sun.

A dish/engine system uses a mirrored dish similar to a very large satellite dish. The dish-shaped surface directs and concentrates sunlight onto a thermal receiver, which absorbs and collects the heat and transfers it to the engine generator. The most common type of heat engine used today in dish/engine systems is the Stirling engine. This system uses the fluid heated by the receiver to move pistons and create mechanical power. The mechanical power is then used to run a generator or alternator to produce electricity.

A power tower system uses a large field of flat, sun-tracking mirrors known as heliostats to focus and concentrate sunlight onto a receiver on the top of a tower. A heat-transfer fluid heated in the receiver is used to generate steam, which, in turn, is used in a conventional turbine generator to produce electricity. Some power towers use water/steam as the heat-transfer fluid. Other advanced designs are experimenting with molten nitrate salt because of its superior heat-transfer and energy-storage capabilities. The energy-storage capability, or thermal storage, allows the system to continue to dispatch electricity during cloudy weather or at night.

CSP deployment

As of July 2012, there are 2183 MW of CSP installed all over the world. Spain, with 1581 MW is the largest market, followed by the US with 509.5 MW. India is currently building about 500 MW to be completed by 2013. South Africa has awarded recently 200 MW. A 100 MW plant is almost complete in Abu Dabi.[2]

Spain is expected to add some 850 MW to reach almost 2500 MW by 2014. There are around 1300 MW being built in the US and another 1300 MW in planning stage. [2]


  1.  "NREL: Learning - Concentrating Solar Power"
  2. 2.0 2.1  "CSP-World"