3d gravity model.zip

URL: https://gdr.openei.org/files/990/3D_Gravity_Model_FallonFORGE.zip

This archive contains 3D gravity inversion results and methodology. The 3D geophysical modelling was performed using the open source SimPEG code (www.simpeg.xyz). The input and output geophysical model files are provided in UBC format (more information on UBC format files can be found at: gif.eos.ubc.ca). The output density model file has also been supplied in .txt file format. The 3D gravity modelling exercise at Fallon FORGE was guided by: a) a 3D geologic model developed by the FORGE team and b) rock density measurements made in Phase 2B. This information is provided elsewhere in the GDR. The core of the 3D model volume used in the gravity modeling exercise has the following dimensions: 8 km (N-S) x 8 km (E-W) x 4 km (thick). This core model volume is centered on the Fallon FORGE site. The majority of the core model volume has 100 m x 100 m x 100 m cubic cells. Near the land surface, model cells are as thin as 1 m to adequately capture variations in topography. All horizontal coordinates in the input and output files are in UTMNAD83 zone 11. All elevations are in meters above sea level.

No preview available.
No handler defined for data type: zip.

Additional Information

Field Value
Last updated March 9, 2018
Created March 9, 2018
Format application/zip
License Creative Commons Attribution 4.0
createdover 1 year ago
formatZIP
idf0000002-58cc-4372-a567-000000000990
mimetypeapplication/zip
position2
resource group id53875419-6448-4c1e-8881-809f7e060116
resource typesite
revision id53fb3899-3444-4c14-9851-5efad0c10045
size3.7 MiB
stateactive